蓝宝石窗片在高温下保持高强度，具有良好的热性能和卓越的透明度。它在高达1000°C的温度下对常见的酸和碱具有耐化学性，对于低于300°C的氟化氢也具有耐化学性。 这些特性促使其广泛用于需要在从真空紫外线到近红外范围内的进行光传输的恶劣环境中。
产品产地:
中国航运港口:
中国福州交付周期:
四周付款:
银行电汇, 西联付款
蓝宝石窗片由单晶蓝宝石制成，因其极高的表面硬度、高导热性、高介电常数以及对常见化学酸和碱的耐受性，使其成为要求苛刻的应用领域（如激光系统）的理想选择。蓝宝石是仅次于钻石的第二个最坚硬的水晶，由于其结构强度，蓝宝石窗片可以比其他普通介电窗片更薄，以提高透明度。在化学上，蓝宝石是单晶氧化铝（Al2O3），可用于0.2-5.5μm的透射率范围。
通用规格
阿贝系数（vd）：72.24
双折射（no-ne）：正交于光轴的可见光，为0.008
通光孔径（%）：≥90
镀膜：非镀膜
热膨胀系数CTE（10-6 /℃）：8.8
密度（g / cm 3）：3.97
折射率nd：1.77
轴方向：随机
平行度（arcmin）：≤3.5
泊松比：0.27
材质：蓝宝石（Al2O3）
表面平整度：2λ（典型值）
表面质量：80-50
表面粗糙度（μm）：每英寸0.1
波长范围（μm）：0.2 - 5.5
波长范围（nm）：200 - 5500
杨氏弹性模量（GPa）：435
努氏硬度（GPa）：1900
特征：
透射率在0.3-5.0μm以及在2-3μm处无吸收
非常坚硬耐用
高导热系数
高容量损伤阈值
蓝宝石窗片注意事项：
（1）可定制任何尺寸的蓝宝石窗片。除圆形外，还可提供方形、三角形或其他多边形的蓝宝石窗片
（2）可根据要求提供0.5mm至50.0 mm的其他厚度。
（3）可据要求提供更好的倒边。
（4）具有抗反射（AR）的窗片
上一个 :
BK7镀增透膜窗片下一页 :
镀增透膜有色玻璃窗片
棒透镜
用于光纤耦合和激光二极管光束成形，工作距离为0mm的透镜非常适用于单模和多模光纤和激光二极管的准直，因为透镜可以直接定位并直接粘合在发射源上。 对于聚焦应用，或者镜头不能与发射源直接接触的情况下，所有镜头也可以具有小的工作距离。UNI Optics可提供Φ1~Φ15mm的尺寸，数量和尺寸，包括抛光/磨削表面的差异，可根据客户要求提供。
N-BK7角锥棱镜
角锥棱镜又称反射镜，它有三个相互垂直的表面和一个斜边面。通过斜边进入的光依次被三个表面反射，并通过平行于入射光束的斜边面出现，而不考虑入射光束的方向。由于其特殊的性能，常被用于距离测量、光学信号处理和激光等领域。
红外材料
1. Germanium (Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength band. Its high refractive index makes Ge ideal for low power imaging systems because of minimum surface curvature. Chromatic aberration is small, often eliminating the need for correction.
| Crystallographic properties | |
| Syngony | Cubic |
| Crystal Form | Poly or Single Crystal |
| Lattice Constant | 5.66 |
| Cleavability | <111>, non-perfect |
| Molecular Weight | 72.6 |
| Physical properties | |
| Density, at 20 °C | 5.33 |
| Hardness, Mohs | 6.3 |
| Dielectric Constant for 9.37 × 109 Hz at 300 K | 16.6 |
| Melting | 937 |
| Thermal Conductivity, W/m·K at at 293 K | 59 |
| Thermal Expansion, 1/K at 298 K | 6.1 × 10-6 |
| Specific Heat Capacity, J/(kgK) at 273-373 K | 0.074 |
| Bandgap, eV | 0.67 |
| Knoop Hardness, kg/mm2 | 800 |
| Youngs Modulus, Gpa | 102.66 |
| Shear Modulus, GPa | 67.04 |
| Bulk Modulus, GPa | 77.86 |
| Debye Temperature, K | 370 |
| Poissons Ratio | 0.278 |
| Elastic Coefficient | C11=129, C12=48.3, C44=67.1 |
| Apparent Elastic Limit | 89.6 MPa (13000psi) |
| Chemical properties | |
| Solubility in water | None |
| Solubility in acids | Soluble |
| Molecular Weight | 72.59 |
2. Silicon (Si)
Silicon (Si) is grown by Czochralski pulling techniques (CZ) and contains some oxygen that causes an absorption band at 9 microns.To avoid this, material can be prepared by a Float-Zone (FZ) process. Optical silicon is generally lightly doped (5 to 40 ohm cm) for best transmission above 10 microns, and doping is usually boron (P-type) and phosphorus (N-type). After doping silicon has a further pass band: 30 to 100 microns which is effective only in very high resistivity uncompensated material.
CZ Silicon is commonly used as substrate material for infrared reflectors and windows in the 1.5-8 micron region. The strong absorption band at 9 microns makes it unsuitable for CO2 laser transmission applications, but it is frequently used for laser mirrors because of its high thermal conductivity and low density. Application as window, lens in the 1.5 - 8 um region; Mirror for CO2 laser and spectrometer applications.
Crystallographic properties
Syngony
Cubic
Lattice Constant, A
5.43
Physical properties
Density
2.33g/cm3
Hardness, Mohs
7
Dielectric Constant for 9.37 x 109 Hz
13
Melting point, оС
1414
Thermal Conductivity, W/m·K at 313 K
163
Thermal Expansion, 1/K at 293 K
2.6x10-6
Specific Heat Capacity, J/(kg°C)
712.8
Bandgap, eV
1.1
Knoop Hardness, kg/mm2
1100
Youngs Modulus, Gpa
130.91
Shear Modulus, GPan
79.92
Bulk Modulus, GPa
101.97
Debye Temperature, K
640
Poissons Ratio
0.28
Chemical properties
Solubility in water
None
Molecular Weight
28.09
3、ZnS material:
ZnS MultiSpectral Under intense heat and pressure, defects within the crystalline lattice are virtually eliminated, leaving a water-clear material with minimal scatter and high transmission characteristics from 0.4 to 12 microns. This material is particularly well suited for high-performance common aperture systems that must perform across a broad wavelength spectrum.
Specifications:
Material: ZnS MultiSpectral
Diameter Tolerance: --------------------- +0.0, -0.1mm
Thickness Tolerance: -------------------- ±0.1mm
Clear Aperture: ---------------------------->85%
Parallelism: -----------------------------------3 arc minute
Surface Quality: ----------------------------80-50 scratch and dig
Wavefront Distortion: -------------------- λ /2 per 25mm @633mm
Bevel: -----------------------------------------Protective (<0.2mm x 45° )
Coating: -------------------------------------- Optional （Uncoated, AR Coating, etc.）
4. ZnSe material
ZnSe is a preferred material for lenses, windows, output couplers and beam expanders for its low absorptivity at infrared wavelengths and its visible transmission. For high-power applications, it’s critical that the material bulk absorption and internal defect structure be carefully controlled, that minimum-damage polishing technology be employed, and the highest quality optical thin-film coatings are used. The material absorption is verified by CO2 laser vacuum calorimetry. Our quality assurance department provides testing and specific optics certification on request.
ZnSe is non-hygroscopic and chemically stable, unless treated with strong acids. It’s safe to use in most industrial field, and laboratory environments.
电话 : +86-591-86395085
电子邮件 : sales@uni-optics.com
