电话 : +86-591-86395085
电子邮件 : sales@uni-optics.com
IPL滤光片是IPL（强脉冲光）机器的关键光学元件，可阻挡紫外波，并为激光设备传输400nm至1200nm的有用波，如光子嫩肤脱毛、血管和痤疮治疗、皮肤再生。
带通滤光片是一种通过一定范围内的频率并拒绝（衰减）该范围之外频率的装置，它用于选择性地传输一部分光谱，同时拒绝所有其他波长。
产品产地:
中国航运港口:
中国福州交付周期:
四周付款:
银行电汇, 西联付款
带通滤滤光片主要特点：
防反射镀膜，最大限度地传输
卓越的表面质量：40/20 S/D
可保证的峰值传输> 90%
1，什么是带通滤光片？
带通滤光片是一种通过一定范围内的频率并拒绝（衰减）该范围之外频率的装置，它用于选择性地传输一部分光谱，同时拒绝所有其他波长。
2，带通滤光片广泛使用于在哪些领域？
光学带通滤光片通常用于生命科学，工业或研发行业，也是各种应用的理想选择，如荧光显微镜，光谱学，临床化学，无线发射器，接收器或成像。
3，优恩立光电可以为您提供什么带通滤光片？
优恩立光电可提供由BK7玻璃，熔融石英，B270，有色玻璃等材料制成的带通滤光片，可根据要求提供定制规格。
透过率曲线
热标签 :
长波通滤镜
长波通滤光片适用于各种应用，如气体监测，温度，传感，热成像和运动传感等。长波通滤光片可阻挡较短波长并传输较长波长。 阻挡可以来自反射，吸收或组合。 带通中的透射可以通过第二表面上的增透膜涂层来增强。
镀宽带增透膜的斜边直角棱镜
直角棱镜通常用于改变光路，或用于将光束重新定向90°。直角棱镜是设计成90°角的棱镜，根据棱镜的方向产生倒置或反转的左手图像，同时使用两个直角棱镜是理想的使图像或光束位移的应用。这些棱镜也被称为镜像反射棱镜。
红外材料
1. Germanium (Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength band. Its high refractive index makes Ge ideal for low power imaging systems because of minimum surface curvature. Chromatic aberration is small, often eliminating the need for correction.
| Crystallographic properties | |
| Syngony | Cubic |
| Crystal Form | Poly or Single Crystal |
| Lattice Constant | 5.66 |
| Cleavability | <111>, non-perfect |
| Molecular Weight | 72.6 |
| Physical properties | |
| Density, at 20 °C | 5.33 |
| Hardness, Mohs | 6.3 |
| Dielectric Constant for 9.37 × 109 Hz at 300 K | 16.6 |
| Melting | 937 |
| Thermal Conductivity, W/m·K at at 293 K | 59 |
| Thermal Expansion, 1/K at 298 K | 6.1 × 10-6 |
| Specific Heat Capacity, J/(kgK) at 273-373 K | 0.074 |
| Bandgap, eV | 0.67 |
| Knoop Hardness, kg/mm2 | 800 |
| Youngs Modulus, Gpa | 102.66 |
| Shear Modulus, GPa | 67.04 |
| Bulk Modulus, GPa | 77.86 |
| Debye Temperature, K | 370 |
| Poissons Ratio | 0.278 |
| Elastic Coefficient | C11=129, C12=48.3, C44=67.1 |
| Apparent Elastic Limit | 89.6 MPa (13000psi) |
| Chemical properties | |
| Solubility in water | None |
| Solubility in acids | Soluble |
| Molecular Weight | 72.59 |
2. Silicon (Si)
Silicon (Si) is grown by Czochralski pulling techniques (CZ) and contains some oxygen that causes an absorption band at 9 microns.To avoid this, material can be prepared by a Float-Zone (FZ) process. Optical silicon is generally lightly doped (5 to 40 ohm cm) for best transmission above 10 microns, and doping is usually boron (P-type) and phosphorus (N-type). After doping silicon has a further pass band: 30 to 100 microns which is effective only in very high resistivity uncompensated material.
CZ Silicon is commonly used as substrate material for infrared reflectors and windows in the 1.5-8 micron region. The strong absorption band at 9 microns makes it unsuitable for CO2 laser transmission applications, but it is frequently used for laser mirrors because of its high thermal conductivity and low density. Application as window, lens in the 1.5 - 8 um region; Mirror for CO2 laser and spectrometer applications.
Crystallographic properties
Syngony
Cubic
Lattice Constant, A
5.43
Physical properties
Density
2.33g/cm3
Hardness, Mohs
7
Dielectric Constant for 9.37 x 109 Hz
13
Melting point, оС
1414
Thermal Conductivity, W/m·K at 313 K
163
Thermal Expansion, 1/K at 293 K
2.6x10-6
Specific Heat Capacity, J/(kg°C)
712.8
Bandgap, eV
1.1
Knoop Hardness, kg/mm2
1100
Youngs Modulus, Gpa
130.91
Shear Modulus, GPan
79.92
Bulk Modulus, GPa
101.97
Debye Temperature, K
640
Poissons Ratio
0.28
Chemical properties
Solubility in water
None
Molecular Weight
28.09
3、ZnS material:
ZnS MultiSpectral Under intense heat and pressure, defects within the crystalline lattice are virtually eliminated, leaving a water-clear material with minimal scatter and high transmission characteristics from 0.4 to 12 microns. This material is particularly well suited for high-performance common aperture systems that must perform across a broad wavelength spectrum.
Specifications:
Material: ZnS MultiSpectral
Diameter Tolerance: --------------------- +0.0, -0.1mm
Thickness Tolerance: -------------------- ±0.1mm
Clear Aperture: ---------------------------->85%
Parallelism: -----------------------------------3 arc minute
Surface Quality: ----------------------------80-50 scratch and dig
Wavefront Distortion: -------------------- λ /2 per 25mm @633mm
Bevel: -----------------------------------------Protective (<0.2mm x 45° )
Coating: -------------------------------------- Optional （Uncoated, AR Coating, etc.）
4. ZnSe material
ZnSe is a preferred material for lenses, windows, output couplers and beam expanders for its low absorptivity at infrared wavelengths and its visible transmission. For high-power applications, it’s critical that the material bulk absorption and internal defect structure be carefully controlled, that minimum-damage polishing technology be employed, and the highest quality optical thin-film coatings are used. The material absorption is verified by CO2 laser vacuum calorimetry. Our quality assurance department provides testing and specific optics certification on request.
ZnSe is non-hygroscopic and chemically stable, unless treated with strong acids. It’s safe to use in most industrial field, and laboratory environments.
长波通滤镜
长波通滤光片适用于各种应用，如气体监测，温度，传感，热成像和运动传感等。长波通滤光片可阻挡较短波长并传输较长波长。 阻挡可以来自反射，吸收或组合。 带通中的透射可以通过第二表面上的增透膜涂层来增强。
BK7和熔融石英玻璃道威棱镜
道威棱镜由H.W.多芬发明，多芬棱镜也被称为反转棱镜。当棱镜绕其长轴旋转时，通过棱镜所看到的图像的旋转速度是棱镜旋转速度的两倍。道威棱镜比较特殊，有时用于特殊的应用。入口和出口表面都有防反射涂层
N-BK7角锥棱镜
角锥棱镜又称反射镜，它有三个相互垂直的表面和一个斜边面。通过斜边进入的光依次被三个表面反射，并通过平行于入射光束的斜边面出现，而不考虑入射光束的方向。由于其特殊的性能，常被用于距离测量、光学信号处理和激光等领域。
